Live Steam
Twin Cylinder "Marine" Model Steam Engine
LONG VERSION
Fully Machined Kit in Brass, Bronze and Steel
The vertical twin cylinder "marine" engine is two single cylinder marine engines connected via a large flywheel on a steel plate, top brace plate and (optional) inlet manifolds.
As with our other marine engines a 15mm shorter version is also available.
As such it is still relatively simple and retains the basic mechanics of engines which powered ships and larger boats which needed the extra power provided by a twin cylinder engine.
NOTE: Pictures are of the assembled kit, this listing is for the kit of parts. Also shown is the optional manifold.
This marine engine layout has two double acting cylinders, eccentric driven slide valves and the large brass flywheel offers smooth running and is capable of powering a range of accessories, in a variety of roles. The engine also includes 2 x double split bronze pedestal bearings for the crank shaft, tube sliders and a substantial cast base.
On the two twin crank shafts, the cranks for each cylinder are offset by 90° which means the engine will self-start in any position.
The engine will run in reverse by applying the steam (or air) input to the outlet ports. Our Reversing/Throttle Valve (optional extra) will control the direction and speed of the engine in either direction.
The kit consists of precision produced parts each carefully made and checked to ensure ease of assembly and reliability in service.
The cylinder assembly and piston are manufactured from brass and the piston shaft, connecting rods, column screws and valves from stainless steel so are not susceptible to corrosion. The piston shafts passes through an adjustable glands and the steam inlet can be either side of the chests.
There is also a 15mm shorter version of this engine based on the short marine single.
Detail Specification:
- Type: Tube Slider
- Bore: 14mm
- Stroke: 18mm
- Flywheel Diameter: 70mm
- Valve type: Piston
- Height (excluding manifold): 160mm
- Length: 160mm
- Width: 75 mm
- Weight: 2.2Kg
- Connections: 1/4" x 40 tpi ME
The kit consists of a set of fully machined parts that can easily be assembled using simple tools such as a screw driver, allen keys, pliers and metal file. The parts are mainly unfinished metal and will also require painting, polishing, filing, etc.
NOTE: The kit is supplied with slot head screws (as per the pictures) but hex head screws and socket head screws are available as options. Some screws as provided may need to the cut or filed to length to complete the model. Optional manifolds and pulley wheels are available.
When assembled the engine is fully working and can be run using steam or simply using compressed air e.g. from hand or foot pumps.